Datasheet
Germany: +49 621 776 4411Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: +1 330 486 0001 Singapore: +65 6779 9091
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com
fa-info@de.pepperl-fuchs.com
1
Ultrasonic sensor UB1000-18GM75-E6-V15
Release date: 2016-04-13 11:16 Date of issue: 2016-04-13 204531_eng.xml
Technical data
General specifications
Sensing range 70 ... 1000 mm
Adjustment range 90 ... 1000 mm
Dead band 0 ... 70 mm
Standard target plate 100 mm x 100 mm
Transducer frequency approx. 255 kHz
Response delay approx. 125 ms
Indicators/operating means
LED yellow indication of the switching state
flashing: program function object detected
LED red "Error", object uncertain
in program function: No object detected
Electrical specifications
Operating voltage U
B
10 ... 30 V DC , ripple 10 %
SS
No-load supply current I
0
≤ 50 mA
Input
Input type 1 program input,
operating range 1: -U
B
... +1 V, operating range 2: +4 V ...
+U
B
input impedance: > 4.7 kΩ; program pulse: ≥ 1 s
Output
Output type 2 switch outputs PNP, NO/NC, programmable
Rated operating current I
e
2 x 100 mA , short-circuit/overload protected
Voltage drop U
d
≤ 3 V
Repeat accuracy ≤ 1 %
Switching frequency f max. 3 Hz
Range hysteresis H 1 % of the set operating distance
Temperature influence ± 1.5 % of full-scale value
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 5-pin
Degree of protection IP67
Material
Housing brass, nickel-plated
Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane,
cover PBT
Mass 60 g
Factory settings
Output 1 Switching point: 90 mm
output function: Switch point operation mode
output behavior: NO contact
Output 2 Switching point: 1000 mm
output function: Switch point operation mode
output behavior: NO contact
Beam width wide
Compliance with standards and
directives
Standard conformity
Standards EN 60947-5-2:2007 + A1:2012
IEC 60947-5-2:2007 + A1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Model Number
UB1000-18GM75-E6-V15
Single head system
Features
•2 switch outputs
• 3 different output functions can be
set
• Selectable sound lobe width
•Program input
• Temperature compensation
• Very small unusable area
Diagrams
0 200 400 600 800 1000 1200 1400 1600
250
200
150
100
5
0
-50
-100
-150
-200
-250
X
Y
Characteristic response curve
Distance X [mm]
Distance Y [mm]
flat surface 100 mm x 100 mm
round bar, Ø 25 mm
wide sound lobe
narrow sound lobe