Datasheet

Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
1
Ultrasonic sensor UB2000-30GM-E5-V15
Release date: 2017-07-03 12:07 Date of issue: 2017-07-03 097969_eng.xml
Technical data
General specifications
Sensing range 80 ... 2000 mm
Adjustment range 120 ... 2000 mm
Dead band 0 ... 80 mm
Standard target plate 100 mm x 100 mm
Transducer frequency approx. 180 kHz
Response delay approx. 150 ms
Indicators/operating means
LED green solid: Power-on
flashing: program function object detected
LED yellow solid: switching state switch output
flashing: program function
LED red normal operation: "fault"
program function: no object detected
Electrical specifications
Operating voltage U
B
10 ... 30 V DC , ripple 10 %
SS
No-load supply current I
0
≤ 50 mA
Input/Output
Synchronization bi-directional
0 level -U
B
...+1 V
1 level: +4 V...+U
B
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse
period: ≥ 2 ms
Synchronization frequency
Common mode operation ≤ 30 Hz
Multiplex operation ≤ 30 Hz / n , n = number of sensors , n ≤ 5
Input
Input type 1 program input,
operating range 1: -U
B
... +1 V, operating range 2: +4 V ...
+U
B
input impedance: > 4.7 kΩ; program pulse: ≥ 1 s
Output
Output type 1 switch output PNP , Normally open/closed , programmable
Rated operating current I
e
200 mA , short-circuit/overload protected
Voltage drop U
d
≤ 2.5 V
Repeat accuracy ≤ 0.5 % of switching point
Switching frequency f ≤ 3.3 Hz
Range hysteresis H 1 % of the set operating distance
Temperature influence < 2 % of far switch point
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 5-pin
Degree of protection IP65
Material
Housing nickel plated brass; plastic components: PBT
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass 140 g
Factory settings
Output Switch point A1: 220 mm
Switch point A2: 2100 mm
output function: Window mode
output behavior: NO contact
Compliance with standards and
directives
Standard conformity
Standards EN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
Approvals and certificates
EAC conformity TR CU 020/2011
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Model Number
UB2000-30GM-E5-V15
Single head system
Features
• Switch output
• 5 different output functions can be
set
•Program input
• Synchronization options
• Deactivation option
• Temperature compensation
• Insensitive to compressed air
Diagrams
Characteristic response curve
Distance X [m]
Distance Y [m]
Curve 1: flat surface 100 mm x 100 mm
Curve 2: round bar, Ø 25 mm
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
0.6
0.4
0.2
0.0
-0.2
-0.4
-0.6
-0.8
1
2
X
Y