Datasheet

Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany [phone] • USA [phone] • Singapore [phone] • Internet http://www.pepperl-fuchs.com
1
Ultrasonic sensor UB4000-F42-E5-V15
Release date: 2009-10-22 13:22 Date of issue: 2009-10-22 134000_ENG.xml
Model Number
UB4000-F42-E5-V15
Single head system
Features
• Switch output
• Extremely small unusable area
• TEACH-IN
• Interference suppression (adjus-
table width of sound cone in close
range)
• Temperature compensation
• Synchronization options
• NO/NC selectable
Curves
X
Y
Characteristic response curve
Distance X [m]
Distance Y [m]
wide sonic beam
narrow sonic beam
Flat surface 100 mm x 100 mm
Round bar, Ø 25 mm
0 1 2 3 4 5 6
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Technical data
General specifications
Sensing range 200 ... 4000 mm
Adjustment range 240 ... 4000 mm
Unusable area 0 ... 200 mm
Standard target plate 100 mm x 100 mm
Transducer frequency approx. 85 kHz
Response delay approx. 325 ms
Indicators/operating means
LED green permanently green: Power on
LED yellow permanent: switching state switch output
flashing: program function
LED red normal operation: "fault"
program function: no object detected
Electrical specifications
Operating voltage U
B
10 ... 30 V DC , ripple 10 %
SS
No-load supply current I
0
≤ 60 mA
Input/output
Synchronization bi-directional
0 level -U
B
...+1 V
1 level: +4 V...+U
B
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse
period: ≥ 2 ms
Synchronization frequency
Common mode operation ≤ 13 Hz
Multiplex operation ≤ 13/n Hz, n = number of sensors
Output
Output type 1 switch output E5, pnp NO/NC, programmable
Rated operational current I
e
200 mA , short-circuit/overload protected
Default setting Switch point A1: 240 mm , Switch point A2: 4000 mm , wide
beam width
Voltage drop U
d
≤ 2.5 V
Repeat accuracy ≤ 0.5 % of switching point
Switching frequency f ≤ 1.2 Hz
Range hysteresis H 1 % of the set operating distance
Temperature influence ± 1 % of full-scale value
Ambient conditions
Ambient temperature -25 ... 70 °C (248 ... 343 K)
Storage temperature -40 ... 85 °C (233 ... 358 K)
Mechanical specifications
Protection degree IP54
Connection connector V15 (M12 x 1), 5 pin
Material
Housing ABS
Transducer epoxy resin/hollow glass sphere mixture; foam
polyurethane, cover PBT
Mass 150 g
Compliance with standards and
directives
Standard conformity
Standards EN 60947-5-2:2007
IEC 60947-5-2:2007