Cut Sheet

Ultrasonic 30 mm Cylindrical
Ultrasonic Sensors
Singapore: [phone]
[e-mail]
USA: [phone]
[e-mail]
Germany: [phone]
[e-mail]
Pepperl+Fuchs Group
www.pepperl-fuchs.com
Subject to modifications without notice Copyright Pepperl+Fuchs
320
Note: Wiring diagrams show
quick disconnect pin numbers.
Quick Disconnect
V95 Type
Wiring Diagrams
30 mm Diameter
AC Switch Point
Output
• 500 mm (20") and 2 m (6.5') models
• 120 VAC powered
• 330° visibility of LEDs
• Fingertip range adjustability (simply
turn the knob to adjust the range)
• 700 mA maximum load current
Specifications
AC Switch Point
SUPPLY VOLTAGE
90-140 VAC
OUTPUT (THYRISTOR)
LOAD CURRENT ≤ 700 mA
LEAKAGE CURRENT ≤ 0.6 mA
VOLTAGE DROP ≤ 1.5 VAC
SHORT CIRCUIT AND
OVERLOAD PROTECTED
No
LED(S)
Yes (2)
CURRENT CONSUMPTION
≤ 75 mA
REPEATABILITY
UB500
≤ 5 mm
UB2000
≤ 20 mm
HYSTERESIS
UB500
≈15 mm
UB2000
≈30 mm
STANDARDS
EN 60947-5-2
PROTECTION IEC
IP65
STANDARD TARGET
100 mm x 100 mm flat plate
TEMPERATURE
RANGE
WORKING -13 °F to +158 °F (-25 °C to 70 °C)
STORAGE -40 °F to +185°F (-40 °C to 85 °C)
HOUSING MATERIAL
Nickel-plated brass
TRANSDUCER
Epoxy resin/silica composite; foam
polyurethane, surround PBT
TEMPERATURE DRIFT
See page 283
APPROVALS
ELECTRICAL CONNECTION
5-pin Mini
(V95)
*Frequency for multiplex mode is divided by the number of sensors.
AC Switch Point Models
Model Number Sensing Range Unusable Area Output Transducer Freq. Response Time Switching Freq.
UB500-30GM65-WS3-BHMS5
70-500 mm 0-70 mm Thyristor, 1 NO 400 kHz ≤45 ms 15 Hz
UB2000-30GM65-WS3-BHMS5
200 mm-2 m 0-200 mm Thyristor, 1 NO 175 kHz ≤90 ms 3.5 Hz
AC Switch Point Output
See pages
865-872 for
accessories
See pages
803-854 for
cordsets
The rugged housing allows these sensors to be used in
demanding environments. A potentiometer sets the single
switch point output.
Stocked item
Typical delivery 4 weeks or less
Consult factory for all other models