Datasheet

Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
1
Ultrasonic sensor UB500-F42-E6-V15
Release date: 2016-02-26 11:34 Date of issue: 2016-02-26 133976_eng.xml
Technical data
General specifications
Sensing range 30 ... 500 mm
Adjustment range 50 ... 500 mm
Dead band 0 ... 30 mm
Standard target plate 100 mm x 100 mm
Transducer frequency approx. 390 kHz
Response delay approx. 50 ms
Indicators/operating means
LED green solid green: Power on
LED yellow 1 solid: switching state switch output 1
flashing: program function
LED yellow 2 solid: switching state switch output 2
flashing: program function
LED red normal operation: "fault"
program function: no object detected
Electrical specifications
Operating voltage U
B
10 ... 30 V DC , ripple 10 %
SS
No-load supply current I
0
≤ 50 mA
Input/Output
Synchronization bi-directional
0 level -U
B
...+1 V
1 level: +4 V...+U
B
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse
period: ≥ 2 ms
Synchronization frequency
Common mode operation ≤ 95 Hz
Multiplex operation ≤ 95/n Hz, n = number of sensors
Output
Output type 2 switch outputs PNP, NO/NC selectable
Rated operating current I
e
200 mA , short-circuit/overload protected
Default setting Switch point A1: 50 mm , Switch point A2: 500 mm , wide
sound lobe
Voltage drop U
d
≤ 2.5 V
Repeat accuracy ≤ 0.5 % of switching point
Switching frequency f ≤ 8 Hz
Range hysteresis H 1 % of the set operating distance
Temperature influence ± 1 % of full-scale value
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 5-pin
Degree of protection IP54
Material
Housing ABS
Transducer epoxy resin/hollow glass sphere mixture; foam
polyurethane, cover PBT
Mass 140 g
Compliance with standards and
directives
Standard conformity
Standards EN 60947-5-2:2007 + A1:2012
IEC 60947-5-2:2007 + A1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated
≤36 V
Model Number
UB500-F42-E6-V15
Single head system
Features
• 2 independent switch outputs
• Extremely small unusable area
• TEACH-IN
• Interference suppression (adjus-
table divergence of sound cone in
close range)
• Temperature compensation
• Synchronization options
• NO/NC selectable
Diagrams
X
Y
Characteristic response curve
Distance X [m]
Distance Y [m]
wide sonic beam
narrow sonic beam
Flat surface 100 mm x 100 mm
Round bar, Ø 25 mm
0.2
0.1
0.0
-0.1
-0.2
0.0 0.2 0.4 0.6 0.8 1.0