User's Manual

https://www.peplink.com 42 Copyright @ 2019 Peplink
support multiple WAN connections after activating drop-in mode, though a SpeedFusion license
may be required to activate more than one WAN port.
Please note the Drop-In Mode is mutually exclusive with VLAN.
Drop-in Mode Settings
Enable
Drop-in mode eases the installation of the Peplink Balance on a live network between the
existing firewall and router, such that no configuration changes are required on existing
equipment. Check the box to enable the drop-in mode feature.
Please refer to Section 12, Drop-in Mode for details.
WAN for Drop-
In Mode
Select the WAN port to be used for drop-in mode. If WAN 1 with LAN Bypass is selected,
the high availability feature will be disabled automatically.
Shared Drop-In
IP
A
When this option is enabled, the passthrough IP address will be used to connect to WAN
hosts (email notification, remote syslog, etc.). The Balance will listen for this IP address
when WAN hosts access services provided by the Balance (web admin access from the
WAN, DNS server requests, etc.).
To connect to hosts on the LAN (email notification, remote syslog, etc.), the default gateway
address will be used. The Balance will listen for this IP address when LAN hosts access
services provided by the Balance (web admin access from the WAN, DNS proxy, etc.).
Shared IP
Access to this IP address will be passed through to the LAN port if this device is not serving
the service being accessed. The shared IP address will be used in connecting to hosts on