Manualshelf

User's Manual

ManualsBrandsPEPWAVE ManualsElectronicsPEPWAVE / peplink Wireless Product
41424344454647484950
https://www.peplink.com 45 Copyright @ 2019 Peplink
may choose to use the built-in WINS server or external WINS servers.
When this unit is connected using SpeedFusion
TM
, other VPN peers can share this unit's
built-in WINS server by entering this unit's LAN IP address in their DHCP WINS Servers
setting. Therefore, all PC clients in the VPN can resolve the NetBIOS names of other clients
in remote peers. If you have enabled this option, a list of WINS clients will be displayed at
Status>WINS Clients.
BOOTP
Check this box to enable BOOTP on older networks that still require it.
Extended
DHCP Option
In addition to standard DHCP options (e.g. DNS server address, gateway address, subnet
mask), you can specify the value of additional extended DHCP options, as defined in RFC
2132. With these extended options enabled, you can pass additional configuration
information to LAN hosts.
To define an extended DHCP option, click the Add button, choose the option to define, and
then enter its value. For values that are in IP address list format, you can enter one IP
address per line in the provided text area input control. Each option can be defined once
only.
DHCP
Reservation
This setting reserves the assignment of fixed IP addresses for a list of computers on the
LAN. The computers to be assigned fixed IP addresses on the LAN are identified by their
MAC addresses.
The fixed IP address assignment is displayed as a cross-reference list between the
computers’ names, MAC addresses, and fixed IP addresses.
Name (an optional field) allows you to specify a name to represent the device. MAC
addresses should be in 00:AA:BB:CC:DD:EE format. Press to create a new record.
Press to remove a record. Reserved clients information can be imported from the
Client List, located at Status>Client List. For more details, please refer to Section 27.3
.
DHCP relay settings is an advanced feature. To enable it, click the button next to DHCP
Server.
DHCP Relay Settings
DHCP Relay
Enter the address of the DHCP server here. DHCP requests will be relayed to it.
DHCP Server
IP Address
DHCP requests from the LAN are relayed to the entered DHCP server.
For active-passive DHCP server configurations, enter active and passive DHCP server IPs
into the DHCP Server 1 and DHCP Server 2 fields.