Product Card

https://www.peplink.com 122 Copyright @ 2019 Peplink

defined and managed in this section. After defining a wireless network, users can choose the

network in AP Profiles.

Click the button New SSID to create a new network profile, or click the existing network profile

to modify its settings.

SSID Settings

SSID

This setting specifies the SSID of the virtual AP to be scanned by Wi-Fi clients.

Enable

Choose an operating schedule for this SSID. Define schedules under System >

Schedule

VLAN ID

This setting specifies the VLAN ID to be tagged on all outgoing packets

generated from this wireless network (i.e., packets that travel from the Wi-Fi

segment through the Pepwave AP One unit to the Ethernet segment via the LAN

port). The default value of this setting is 0, which means VLAN tagging is

disabled (instead of tagged with zero).

Broadcast SSID

This setting specifies whether or not Wi-Fi clients can scan the SSID of this

wireless network. Broadcast SSID is enabled by default.

Data Rate

Select Auto to allow the Peplink Balance to set the data rate automatically, or

select Fixed and choose a rate from the displayed drop-down menu.

Multicast Filter

This setting enables the filtering of multicast network traffic to the wireless SSID.

Multicast Rate

This setting specifies the transmit rate to be used for sending multicast network

traffic. The selected Protocol and Channel Bonding settings will affect the rate

options and values available here.