Product Card

https://www.peplink.com 127 Copyright @ 2019 Peplink
Port
UDP traffic on any port. Choose Single Port and then enter a port number in the provided
field to allow or block TCP or UDP traffic from that port only. You can also choose Port
Range and enter a range of ports in the provided fields to allow or deny TCP or UDP traffic
from the specified port range.
IP Address /
Subnet Mask
If you have chosen IP Address as your firewall rule type, enter the IP address and subnet
mask identifying the subnet to allow or deny.
MAC Address
If you have chosen MAC Address as your firewall rule type, enter the MAC address
identifying the machine to allow or deny.
11.1.3 Settings
AP Settings
SSID
You can select the wireless networks for 2.4 GHz or 5 GHz seperately for each SSID.
Operating
Country
This drop-down menu specifies the national/regional regulations which the Wi-Fi radio
should follow.
● If a North American region is selected, RF channels 1 to 11 will be available
and the maximum transmission power will be 26 dBm (400 mW).
● If European region is selected, RF channels 1 to 13 will be available. The
maximum transmission power will be 20 dBm (100 mW).
NOTE: Users are required to choose an option suitable to local laws and regulations.
Preferred
Frequency
Indicate the preferred frequency to use for clients to connect.
Important Note
Per FCC regulation, the country selection is not available on all models marketed in
the US. All US models are fixed to US channels only.