Product Card

https://www.peplink.com 129 Copyright @ 2019 Peplink
Advanced AP Settings
Management
VLAN ID
This field specifies the VLAN ID to tag to management traffic, such as communication
traffic between the AP and the AP Controller. The value is zero by default, which means
that no VLAN tagging will be applied.
NOTE: Change this value with caution as alterations may result in loss of connection to
the AP Controller.
Operating
Schedule
Choose from the schedules that you have defined in System>Schedule. Select the
schedule for the integrated AP to follow from the drop-down menu.
Beacon Rate
A
This option is for setting the transmit bit rate for sending a beacon. By default, 1Mbps is
selected.
Beacon Interval
A
This option is for setting the time interval between each beacon. By default, 100ms is
selected.
DTIM
A
This field allows you to set the frequency for the beacon to include delivery traffic
indication messages. The interval is measured in milliseconds. The default value is set to
1 ms.
RTS Threshold
A
The RTS (Request to Clear) threshold determines the level of connection required before
the AP starts sending data. The recommended standard of the RTS threshold is around
500.
Fragmentation
Threshold
A
This setting determines the maximum size of a packet before it gets fragmented into
multiple pieces.
Distance / Time
Convertor
Select the range you wish to cover with your Wi-Fi, and the router will make
recommendations for the Slot Time and ACK Timeout.