Product Card

https://www.peplink.com 141 Copyright @ 2019 Peplink
Admin
Password
This field allows you to specify a new administrator password.
Confirm Admin
Password
This field allows you to verify and confirm the new administrator password.
Read-only User
Name
Read-only User Name is set as user by default, but can be changed, if desired.
User Password
This field allows you to specify a new user password. Once the user password is set, the
read-only user feature will be enabled.
Confirm User
Password
This field allows you to verify and confirm the new user password.
Front Panel
Passcode
To require a 4-digit passcode to access front panel controls, check this box and then select
the code from the drop-down menus.
Web Session
Timeout
This field specifies the number of hours and minutes that a web session can remain idle
before the Balance terminates its access to the web admin interface. By default, it is set to 4
hours.
Authentication
by RADIUS
With this box is checked, the web admin will authenticate using an external RADIUS server.
Authenticated users are treated as either "admin" with full read-write permission or “user”
with read-only access. Local admin and user accounts will be disabled. When the device is
not able to communicate with the external RADIUS server, local accounts will be enabled
again for emergency access. Additional authentication options will be available once this
box is checked.
Auth Protocol
This specifies the authentication protocol used. Available options are MS-CHAP v2 and
PAP.
Auth Server
This specifies the access address and port of the external RADIUS server.
Auth Server
Secret
This field is for entering the secret key for accessing the RADIUS server.
Auth Timeout
This option specifies the time value for authentication timeout.
Accounting
Server
This specifies the access address and port of the external accounting server.
Accounting
Server Secret
This field is for entering the secret key for accessing the accounting server.
Network
Connection
This option is for specifying the network connection to be used for authentication. Users can
choose from LAN, WAN, and VPN connections.