Product Card

https://www.peplink.com 142 Copyright @ 2019 Peplink
Restricted
Admin Access
Check this box to restrict management to administrators connected to the management
port.
CLI SSH &
Console
The CLI (command line interface) can be accessed via SSH. It can also be accessed from
the serial console port on some Peplink Balance models. This field enables CLI support. For
additional information regarding CLI, please refer to Section 22.5.
CLI SSH Port
This field determines the port on which clients can access CLI SSH.
CLI SSH
Access
This menu allows you to choose between granting access to LAN and WAN clients, or to
LAN clients only.
Security
This option is for specifying the protocol(s) through which the web admin interface can be
accessed:
● HTTP
● HTTPS
● HTTP/HTTPS
Web Admin
Port
This field is for specifying the port number on which the web admin interface can be
accessed.
Web Admin
Access
This option is for specifying the network interfaces through which the web admin interface
can be accessed:
● LAN only
● LAN/WAN
If LAN/WAN is chosen, the WAN Connection Access Settings form will be displayed.
LAN Connection Access Settings
Allowed LAN
Networks
This field allows you to permit only specific networks or VLANs to access the Web UI.
12.1.2 Firmware
The firmware of Peplink Balance is upgradeable through the web admin interface.
Firmware upgrade functionality is located at System>Firmware.