User's Manual

https://www.peplink.com 100 Copyright @ 2020 Pepwave
When a computer creates a rule using these protocols, the specified TCP/UDP port of all WAN
connections' default IP address will be forwarded.
Check the corresponding box(es) to enable UPnP and/or NAT-PMP. Enable these features only
if you trust the computers connected to the LAN ports.
When the options are enabled, a table listing all the forwarded ports under these two protocols
can be found at Status>UPnP / NAT-PMP.
17 NAT Mappings
NAT mappings allow IP address mapping of all inbound and outbound NATd traffic to and from
an internal client IP address. Settings to configure NAT mappings are located at
Advanced>NAT Mappings.
To add a rule for NAT mappings, click Add NAT Rule.
NAT Mapping Settings
LAN
NAT mapping rules can be defined for a single LAN IP Address, an IP Range, or