User's Manual
https://www.peplink.com 28 Copyright @ 2020 Pepwave
connected
act as a router, and most Layer 3 routing functions will cease to work.
DHCP Option 82
Click on the question Mark if you want to enable DHCP Option 82.
This allows the device to inject Option 82 with Router Name information before
forwarding the DHCP Request packet to a PepVPN peer, such that the DHCP Server
can identify where the request originates from.
DHCP Server Settings
DHCP Server
When this setting is enabled, the DHCP server automatically assigns an IP address
to each computer that is connected via LAN and configured to obtain an IP address
via DHCP. The Pepwave routers DHCP server can prevent IP address collision on
the LAN.
DHCP Server
Logging
Enable logging of DHCP events in the eventlog by selecting the checkbox.
IP Range &
Subnet Mask
These settings allocate a range of IP addresses that will be assigned to LAN
computers by the Pepwave routers DHCP server.
Lease Time
This setting specifies the length of time throughout which an IP address of a DHCP
client remains valid. Upon expiration of the lease time, the assigned IP address will
no longer be valid and renewal of the IP address assignment will be required.
DNS Servers
This option allows you to input the DNS server addresses to be offered to DHCP
clients. If Assign DNS server automatically is selected, the Pepwave routers
built-in DNS server address (i.e., LAN IP address) will be offered.
WINS Servers
This option allows you to optionally specify a Windows Internet Name Service
(WINS) server. You may choose to use the built-in WINS server or external WINS
servers.
When this unit is connected using SpeedFusion
TM
, other VPN peers can share this
unit's built-in WINS server by entering this unit's LAN IP address in their DHCP