User's Manual

https://www.peplink.com 47 Copyright @ 2020 Pepwave
Connection Settings
WAN
Connection
Name
Indicate a name you wish to give this WAN connection
Enable
Click the checkbox to toggle the on and off state of this connection.
Routing Mode
This option allows you to select the routing method to be used in routing IP frames via
the WAN connection. The mode can be either NAT (Network Address Translation) or
IP Forwarding.
In the case if you need to choose IP Forwarding for your scenario. Click the button
to enable IP Forwarding.
Subnet
Selection
Choose between:
Auto: The subnet mask will be set automatically.
Force /31 Subnet: The subnet mask will be set as 255.255.255.254(/31), and the
gateway IP address will be recalculated.
Connection
Priority
This option allows you to configure the WAN connection whether for normal daily usage
or as a backup connection only.
If Always-on is chosen, the WAN connection will be kept on continuously, regardless
of the priority of other WAN connections.
If Backup is chosen, the WAN connection will depend on other WAN connections. It
will not be used when one or more higher priority dependent WAN connections are