User's Manual

https://www.peplink.com 51 Copyright @ 2020 Pepwave
To define the threshold manually using specific signal strength values, please click on the
question Mark and the following field will be visible.
General Settings
Independent
from Backup
WANs
If this is checked, the connection will be working independent from other Backup WAN
connections. Those in Backup Priority will ignore the status of this WAN connection, and
will be used when none of the other higher priority connections are available.
Standby State
This option allows you to choose whether to remain connected or disconnected when
this WAN connection is no longer in the highest priority and has entered the standby
state. When Remain connected is chosen, bringing up this WAN connection to active
makes it immediately available for use.
Idle Disconnect
When Internet traffic is not detected within the user-specified timeframe, the modem will
automatically disconnect. Once the traffic is resumed by the LAN host, the connection
will be re-activated.