User's Manual

https://www.peplink.com 55 Copyright @ 2020 Pepwave
Bandwidth Allowance Monitor
Action
If Error! Reference source not found. is enabled, you will be notified by email
when usage hits 75% and 95% of the monthly allowance.
If Disconnect when usage hits 100% of monthly allowance is checked, this WAN
connection will be disconnected automatically when the usage hits the monthly
allowance. It will not resume connection unless this option has been turned off or
the usage has been reset when a new billing cycle starts.
Start Day
This option allows you to define which day of the month each billing cycle begins.
Monthly
Allowance
This field is for defining the maximum bandwidth usage allowed for the WAN
connection each month.
Health Check Settings
Method
This setting specifies the health check method for the WAN connection. This value
can be configured as Disabled, PING, DNS Lookup, or HTTP. The default method
is DNS Lookup. For mobile Internet connections, the value of Method can be
configured as Disabled or SmartCheck.
Health Check Disabled