User's Manual

https://www.peplink.com 64 Copyright @ 2020 Pepwave
10 Advanced Wi-Fi Settings
Wi-Fi settings can be configured at Advanced>Wi-Fi Settings (or AP>Settings on some
models). Note that menus displayed can vary by model.
AP Settings
SSID
You can select the wireless networks for 2.4 GHz or 5 GHz separately for each
SSID.
Operating
Country
This drop-down menu specifies the national/regional regulations which the Wi-
Fi radio should follow.
If a North American region is selected, RF channels 1 to 11 will be
available and the maximum transmission power will be 26 dBm (400
mW).
If European region is selected, RF channels 1 to 13 will be available.
The maximum transmission power will be 20 dBm (100 mW).
NOTE: Users are required to choose an option suitable to local laws and
regulations.
Preferred
Frequency
Indicate the preferred frequency to use for clients to connect.
Important Note
Per FCC regulation, the country selection is not available on all models marketed in the US. All
US models are fixed to US channels only.