User's Manual
Table Of Contents
- 1 Introduction and Scope
- Glossary
- 2 Product Features
- 3 Pepwave MAX Mobile Router Overview
- 4 Advanced Feature Summary
- 5 Installation
- 6 Mounting the Unit
- 7 Connecting to the Web Admin Interface
- 8 Configuring the LAN Interface(s)
- 9 Configuring the WAN Interface(s)
- 10 Advanced Wi-Fi Settings
- 11 ContentHub Configuration
- 12 MediaFast Configuration
- 13 Bandwidth Bonding SpeedFusionTM / PepVPN
- 14 IPsec VPN
- 15 Outbound Policy Management
- 16 Inbound Access
- 17 NAT Mappings
- 18 QoS
- 19 Firewall
- 22 Remote User Access
- 23 Miscellaneous Settings
- 24 AP - access point
- 26 AP Controller Status
- 27 Toolbox
- 28 System Settings
- 29 Tools
- 30 Status
- Appendix A: Restoration of Factory Defaults
- Appendix B: Declaration
https://www.peplink.com
Copyright @ 2021 Pepwave
This Active Sessions section displays the active inbound/outbound sessions of each WAN
connection on the Pepwave router. A filter is available to sort active session information. Enter
a keyword in the field or check one of the WAN connection boxes for filtering.
30.4
Client List
The client list table is located at Status>Client List. It lists DHCP and online client IP addresses,
names (retrieved from the DHCP reservation table or defined by users), current download and
upload rate, and MAC address.
Clients can be imported into the DHCP reservation table by clicking the button on the right.
You can update the record after import by going to Network>LAN.
If the PPTP server (see Section 19.2), SpeedFusion
TM
(see Section 12.1), or AP controller
(see Section 20) is enabled, you may see the corresponding connection name listed in the
Name field.