User's Manual
Table Of Contents
- 1 Introduction and Scope
- Glossary
- 2 Product Features
- 3 Pepwave MAX Mobile Router Overview
- 4 Advanced Feature Summary
- 5 Installation
- 6 Mounting the Unit
- 7 Connecting to the Web Admin Interface
- 8 Configuring the LAN Interface(s)
- 9 Configuring the WAN Interface(s)
- 10 Advanced Wi-Fi Settings
- 11 ContentHub Configuration
- 12 MediaFast Configuration
- 13 Bandwidth Bonding SpeedFusionTM / PepVPN
- 14 IPsec VPN
- 15 Outbound Policy Management
- 16 Inbound Access
- 17 NAT Mappings
- 18 QoS
- 19 Firewall
- 22 Remote User Access
- 23 Miscellaneous Settings
- 24 AP - access point
- 26 AP Controller Status
- 27 Toolbox
- 28 System Settings
- 29 Tools
- 30 Status
- Appendix A: Restoration of Factory Defaults
- Appendix B: Declaration
https://www.peplink.com
Copyright @ 2021 Pepwave
11.3 Configure a website to be published from the ContentHub
This option allows you to sync a website to the Peplink router, this website will then be published
with the specified domain from the router itself and makes the content available to the client via
the HTTP/HTTPS protocol.
Only FTP sync is supported for this type of ContentHub content.
The content should be uploaded to an FTP server before.
Click New Website, and the following configuration options will appear:
The Active checkbox toggles the activation of the content.
For type, select Website.
Type
HTTP,HTTPS or both
Domain/Pat
h
The contenhub uses this as the domain name for client access (such as
http://mytest.com).
Source
Enter the server details that the content will be downloaded from. Enter your credentials
under Username and Password.
Period
This field determines how often the Router will search for updates to the source