User's Manual
Table Of Contents
- 1 Introduction and Scope
- Glossary
- 2 Product Features
- 3 Pepwave MAX Mobile Router Overview
- 4 Advanced Feature Summary
- 5 Installation
- 6 Mounting the Unit
- 7 Connecting to the Web Admin Interface
- 8 Configuring the LAN Interface(s)
- 9 Configuring the WAN Interface(s)
- 10 Advanced Wi-Fi Settings
- 11 ContentHub Configuration
- 12 MediaFast Configuration
- 13 Bandwidth Bonding SpeedFusionTM / PepVPN
- 14 IPsec VPN
- 15 Outbound Policy Management
- 16 Inbound Access
- 17 NAT Mappings
- 18 QoS
- 19 Firewall
- 22 Remote User Access
- 23 Miscellaneous Settings
- 24 AP - access point
- 26 AP Controller Status
- 27 Toolbox
- 28 System Settings
- 29 Tools
- 30 Status
- Appendix A: Restoration of Factory Defaults
- Appendix B: Declaration
https://www.peplink.com
Copyright @ 2021 Pepwave
content.
Method
Only applicable for application: Choose between sync or file upload
Bandwidth
Limit
Used to limit the bandwidth for each client to access the web server.
Click “Save & Apply Now” to activate the changes. Below is a screenshot after configuration:
The content will be sync based on the Period that is configured before.
If you want to trigger the sync manually, you can click “ ”.
The “Status” column shows the sync progress.
When the sync complete, there is a summary as shown in the screenshot below:
To access the content, open a browser in MFA’s client and enter the domain configured
before (such as http://mytest.com
).
11.4
Configure an application to be published from the
ContentHub
Mediafast Routers allow you to configure and publish ant application from the router itself by
using the supported framework
● Python (version 2.7.12)
● Ruby (version 2.3.3)
● Node.js (version 6.9.2)