User's Manual

https://www.peplink.com

DHCP Relay Settings

Enable

Check this box to turn on DHCP relay. Click the icon to disable DHCP relay.

DHCP Server IP

Address

Enter the IP addresses of one or two DHCP servers in the provided fields. The

DHCP servers entered here will receive relayed DHCP requests from the LAN. For

active-passive DHCP server configurations, enter active and passive DHCP server

relay IP addresses in DHCP Server 1 and DHCP Server 2.

DHCP Option 82

DHCP Option 82 includes device information as relay agent for the attached client

when forwarding DHCP requests from client to server. This option also embeds

the device’s MAC address and network name in circuit and remote IDs. Check this

box to enable DHCP Option 82.

Once DHCP is set up, configure LAN Physical Settings, Static Route Settings, WINS

Server Settings, and DNS Proxy Settings as noted above.

8.2 Port Settings

To configure port settings, navigate to Network > Port Settings

On this screen, you can enable specific ports, as well as determine the speed of the LAN

ports, whether each port is a trunk or access port, can well as which VLAN each link belongs

to, if any.

8.3 Captive Portal

The captive portal serves as a gateway that clients have to pass if they wish to access the

internet using your router. To configure, navigate to Network>LAN>Captive Portal.