Users Manual

https://www.peplink.com

When a computer creates a rule using these protocols, the specified TCP/UDP port of all

WAN connections' default IP address will be forwarded.

Check the corresponding box(es) to enable UPnP and/or NAT-PMP. Enable these features

only if you trust the computers connected to the LAN ports.

When the options are enabled, a table listing all the forwarded ports under these two protocols

can be found at Status>UPnP / NAT-PMP.

17 NAT Mappings

NAT mappings allow IP address mapping of all inbound and outbound NAT’d traffic to and

from an internal client IP address. Settings to configure NAT mappings are located at

Advanced>NAT Mappings.

To add a rule for NAT mappings, click Add NAT Rule.

NAT Mapping Settings

LAN

NAT mapping rules can be defined for a single LAN IP Address, an IP Range,