Specifications

OPYRIGHT

RADEMARKS

Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks

of their respective owners.

DHCP Server

Check to enable the DHCP server feature of your access point. Enabling DHCP is the

best option for most users. The following options will be enabled once you have checked

and enabled the DHCP server.

IP Range

Enter the first and last IP addresses of the range of addresses that your access point will

make available to DHCP clients. The default range is from

192.168.1.100

192.168.1.200

, with 24-bit subnet mask.

Broadcast

Address

Enter the broadcast address that DHCP clients will use when communicating with the

entire LAN segment. The default value is

192.168.1.255

Gateway

Enter the default gateway address that DHCP clients will use to access the internet. By

default, this address will be the same as your access point’s IP address on the LAN.

DNS 1/2/3

DNS 1

, enter the IP address of the primary DNS server offered to DNS clients or

accept the default of

192.168.1.1

, which is your access point’s address on the LAN. You

can also specify up to two additional DNS servers to use when the primary server is busy

or down.

Lease Time

Specify the length of time that an IP address of a DHCP client remains valid. When an

address lease time has expired, the assigned IP address is no longer valid, and renewal

of the IP address assignment is required. By default, this value is set to one day.

DHCP

Reservation

To reserve certain addresses for specific clients, such as network printers, enter the

device’s MAC Address and a static IP to be assigned to the device. Click to add

the DHCP reservation. To delete a DHCP reservation, click .

DMZ

Check this box to forward traffic sent to the WAN IP address to the DMZ IP address.

DMZ IP

Enter an IP address clients will use to connect to the DMZ.

To create a port forwarding rule, first click the

Add Service

button, located in the