Specifications
C
OPYRIGHT
&
T
RADEMARKS
Specifications are subject to change without notice. Copyright © 7/11/16 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks
of their respective owners.
Once you’ve specified a local ID, click the
New Profile
button to configure
PepVPN.
PepVPN Profile Settings
Enable
Check this box to enable PepVPN.
Name
Enter a name to represent this profile. The name can be any combination of
alphanumeric characters (0-9, A-Z, a-z), underscores (_), dashes (-), and/or non-
leading/trailing spaces ( ).
Encryption
By default, VPN traffic is encrypted with
256-bit AES
. If
Off
is selected on both sides of
a VPN connection, no encryption will be applied.
Remote ID
To allow your access point to establish a VPN connection with a specific remote peer
using a unique identifying number, enter the peer’s ID or serial number here.
Authentication
Select
By Remote ID Only
or
Preshared Key
to specify the method your access point
will use to authenticate peers. When selecting
By Remote ID Only
, be sure to enter a
unique peer ID number in the
Remote ID
field.
Pre-shared Key
This optional field becomes available when
Pre-shared Key
is selected as the VPN
Authentication
method, as explained above.
Pre-shared Key
defines the pre-shared
key used for this particular VPN connection. The VPN connection's session key will be
further protected by the pre-shared key. The connection will be up only if the pre-shared
keys on each side match. Click
Hide / Show Passphrase
to toggle passphrase
visibility.
Remote IP
Address / Host
Names (Optional)
Optionally, you can enter a remote peer’s WAN IP address or hostname(s) here. If the
remote client uses more than one address, enter only one of them here. Multiple
hostnames are allowed and can be separated by a space character or carriage return.
Dynamic-DNS host names are also accepted.
With this field filled, your access point will initiate connection to each of the remote IP