Product Card

https://www.peplink.com 182 Copyright @ 2019 Peplink
left.
The wan-to-wan connection disabled by the switch is temporary and will be re-enabled after 15 minutes
without any action.
This can be used when testing the PepVPN speed between two locations to see if there is interference or
network congestion between certain WAN connections.
The PepVPN test configuration allows to configure and perform throughput tests.
THis is usually done after the initial installation of the routers and in case there are problems with
aggregation.
Press the Start button to perform throughput test according to the configured options.
If TCP is selected, 4 parallel streams will be generated to get the optimal results by
default. This can be customized by selecting a different value of streams.
Using more streams will typically get better results if the latency of the tunnel is high.