Product Card

https://www.peplink.com 204 Copyright @ 2019 Peplink
Settings
Set persistence in at Advanced>Outbound Policy.
Click Add Rule, select HTTP (TCP port 80) for web service, and select Persistence.
Click Save and then Apply Changes, located at the top right corner, to complete the
process.
Tip
A network administrator can use the traceroute utility to manually analyze the connection path of a particular WAN
connection.
Bypassing the Firewall to Access Hosts on LAN
Scenario
There are times when remote access to computers on the LAN is desirable; for
example, when hosting web sites, online businesses, FTP download and upload areas,
etc. In such cases, it may be appropriate to create an inbound NAT mapping for the
network to allow some hosts on the LAN to be accessible from outside of the firewall.
Solution
The web admin interface can be used to add an inbound NAT mapping to a host and to
bind the host to the WAN connection(s) of your choice. To begin, navigate to
Network>NAT Mappings.
In this example, the host with an IP address of 192.168.1.102 is bound to 10.90.0.75 of
WAN1: