Users Manual

https://www.peplink.com 100 Copyright @ 2019 Peplink
MDM Settings
Enable
Click this checkbox to enable MDM on your router.
Account
Settings
Click Follow Web Admin Account to allow client devices to use the built-in administrator
account when performing MDM. Set Custom to specify a username and password your
router will use to log into your client devices.
Please refer to the knowledgebase for information about enrolling client devices to MDM:
https://forum.peplink.com/t/how-to-enroll-a-device-to-the-mdm-server/8454
Docker
MediaFast enabled routers can host Docker containers when running firmware 7.1 or later.
Docker is an open platform for developing, shipping, and running applications.
From firmware version 7.1.0 upwards it is possible to install and run Docker Containers on your Peplink
Mediafast 500 or 750 router.
Due to the nature of Docker and its unlimited variables; this feature is supported by Peplink up to the
point of creating a running Docker Container.
Information about Docker can be found on the Docker Documentation site: https://docs.docker.com/ 2
This will allow you to run for example a file sharing platform (Owncloud), a web server (Wordpress,
Joomla) , a learning platform (Moodle) or a visualisation tool for viewing large scale data (Kibana).
The Peplink router will search through the Docker Hub repository when creating a new Docker Container.
https://hub.docker.com/explore/ 7
For detailed configuration instructions please refer to our knowledge base:
https://forum.peplink.com/t/how-to-run-a-docker-application-on-a-peplink-mediafast-
router/16021
7.9 Captive Portal
The captive portal serves as a gateway that clients have to pass if they wish to access the Internet using
your router. To configure, navigate to
Network>Captive Portal.