Users Manual

https://www.peplink.com 150 Copyright @ 2019 Peplink
11
System Tab
11.1 System
11.1.1 Admin Security
There are two types of user accounts available for accessing the web admin: admin and user. They
represent two user levels: the admin level has full administrative access, while the user level is read-only.
The user level can access only the device's status information; users cannot make any changes on the
device.
A web login session will be logged out automatically when it has been idle longer than the Web Session
Timeout. Before the session expires, you may click the Logout button in the web admin to exit the
session.
0 hours 0 minutes signifies an unlimited session time. This setting should be used only in special
situations, as it will lower the system security level if users do not log out before closing the browser. The
default is 4 hours, 0 minutes.
For security reasons, after logging in to the web admin Interface for the first time, it is recommended to
change the administrator password. Configuring the administration interface to be accessible only from
the LAN can further improve system security. Administrative settings configuration is located at
System>Admin Security.