Users Manual

https://www.peplink.com 162 Copyright @ 2019 Peplink
Allowed Source
Subnet
Address
This setting specifies a subnet from which access to the SNMP server is allowed. Enter
subnet address here (e.g., 192.168.1.0) and select the appropriate subnet mask.
To define a user name for SNMPv3, click Add SNMP User in the SNMPv3 User Name table, upon which
the following screen is displayed:
SNMPv3 User Settings
User Name
This setting specifies a user name to be used in SNMPv3.
Authentication
Protocol
This setting specifies via a drop-down menu one of the following valid authentication
protocols:
● NONE
● MD5
● SHA
When MD5 or SHA is selected, an entry field will appear for the password.
Privacy Protocol
This setting specifies via a drop-down menu one of the following valid privacy
protocols:
● NONE
● DES
When DES is selected, an entry field will appear for the password.
11.1.8 InControl
InControl is a cloud-based service which allows you to manage all of your Peplink and Pepwave devices
with one unified system. With it, you can generate reports, gather statistics, and configure your devices
automatically. All of this is now possible with InControl.
When this check box is checked, the device's status information will be sent to the Peplink InControl