Users Manual

RIPv2 Settings

Authentication

If an authentication method is used, select one from this drop-down menu.

Available options are MD5 and Text. Authentication key(s) may be input next to

the drop-down menu after selecting an authentication method.

Interfaces

Select the interface(s) that this area will use to listen to and deliver RIPv2 packets.

OSPF & RIPv2 Route Advertisement

PepVPN Route

Isolation

Isolate PepVPN peers from each other. Received PepVPN routes will not be

forwarded to other PepVPN peers to reduce bandwidth consumption..

Network

Advertising

Networks to be advertised over OSPF & RIPv2. If no network is selected, all LAN /

VLAN networks will be advertised by default.

Static Route

Advertising

Enabling OSPF & RIPv2 Route Advertising allows it to advertise LAN static routes

over OSPF & RIPv2. Static routes on the Excluded Networks table will not be

advertised.

22.2 BGP

Click the Network tab along the top bar, and then click the BGP item on the sidebar to configure

BGP.

Click the "x" to delete a BGP profile.

Click "Add" to create a new BGP profile.

https://www.peplink.com

155