Users Manual

Scenario 4: SIM Injector in a remote location

Setup topology

Requirements for installing a SIM Injector in a remote location:

● Cellular router communicates with the SIM Injector via UDP port 50000. Therefore this

port must be reachable via public IP over the Internet.

● The one way latency between the cellular router and the SIM Injector should be up to

250 ms. A higher latency may lead to stability issues.

● The cellular router must have Internet connection to connect to the SIM Injector. It can

be another Internet connection via Ethernet or Fiber if possible, or a secondary cellular

interface with a local SIM (Ignite SIM).

● Due to its high latency, it is not recommended to use satellite WAN for connecting to a

SIM Injector in remote locations.

SIM Injector configuration is the same as in Scenario 1.

Cellular Router configuration

Step 1. Enable the SIM Injector communication protocol.

1a. For a Balance cellular router, go to the Network (Top tab).

1b. For a MAX cellular router, go to the Advanced (Top tab).

https://www.peplink.com

255