Users Manual

ManualsBrandsPEPWAVE ManualsElectronicspeplink PEPWAVE Wireless Product

111

112

113

114

115

116

117

118

119

120

Interface access

TCP 443

HTTPS traffic

Web Admin

Interface access

(secure)

Inbound

Enabled

TCP 8822

SSH

Inbound

Disabled

UDP 161

SNMP Get

SNMP monitoring

Inbound

Disabled

UDP 162

SNMP Trap

SNMP monitoring

Outbound

Disabled

TCP, UDP 1812

Radius Authentication

Radius

Outbound

Disabled

TCP, UDP 1813

Radius Accounting

Radius

Outbound

Disabled

UDP 123

Network Time Protocol

NTP

Inbound

Outbound

Disabled

Enabled

TCP 60660

Real-time location data in

NMEA format

GPS

Outbound

Disabled

Disclaimer:

● By default, only TCP 32015 and UDP 4500 are needed for PepVPN / SpeedFusion.

● Inbound / Outbound* - Inbound = For Server mode; Outbound = For Client mode

● UDP 32015º - If IPsec VPN or L2TP/IPsec RUA is enabled, the UDP 4500 is occupied, so

PepVPN / SpeedFusion will automatically switch to UPD 32015 as VPN data port .

● UDP 32015+N-1^ / TCP/UDP 4500+N-1^ - When using Sub-Tunnels, multiple ports are in use (1

for each Sub-Tunnel profile).

● The default UDP data ports used when using (N number of Sub-Tunnel profiles) are:

4500…4500+N-1, or (when port 4500 is in use by IPsec or L2TP/IPsec) 32015… 32015+N-1".

https://www.peplink.com

259