Users Manual

The following knowledge base article describes how to create self-signed certificates and import

it to a Peplink Product.

https://forum.peplink.com/t/how-to-create-a-self-signed-certificate-and-import-it-to-a-peplink-pro

duct/

24.3 Service Forwarding

Service forwarding settings are located at Advanced>Misc. Settings>Service Forwarding.

Service Forwarding

SMTP Forwarding

When this option is enabled, all outgoing SMTP connections destined for

any host at TCP port 25 will be intercepted. These connections will be

redirected to a specified SMTP server and port number. SMTP server

settings for each WAN can be specified after selecting Enable.

Web Proxy

Forwarding

When this option is enabled, all outgoing connections destined for the proxy

server specified in Web Proxy Interception Settings will be intercepted.

These connections will be redirected to a specified web proxy server and

port number. Web proxy interception settings and proxy server settings for

each WAN can be specified after selecting Enable.

DNS Forwarding

When this option is enabled, all outgoing DNS lookups will be intercepted

and redirected to the built-in DNS name server. If any LAN device is using

the DNS name servers of a WAN connection, you may want to enable this

option to enhance the DNS availability without modifying the DNS server

setting of the clients. The built-in DNS name server will distribute DNS

lookups to corresponding DNS servers of all available WAN connections. In

this case, DNS service will not be interrupted, even if any WAN connection

is down.

Custom Service

Forwarding

When custom service forwarding is enabled, outgoing traffic with the

specified TCP port will be forwarded to a local or remote server by defining

its IP address and port number.

https://www.peplink.com

167