Users Manual

GPIO Menu

Note: This feature is applicable for certain models that come with a GPIO interface.

Ignition Sensing options can be found in Advanced > GPIO.

The configurable option for Ignition Input is Delay; the time in seconds that the router stays

powered on after the ignition is turned off.

The O/P (connected to the I/O pin on a 4 pin connector) can be configured as a digital input, a

digital output, or an analog input.

Digital Input - the connection supports input sensing; it reads the external input and determines

if the settings should be 'High' (on) or 'Low' (off).

Digital Output - when there is a healthy WAN connection, the output pin is marked as 'High' (on).

Otherwise, it will be marked as 'Low' (off).

Note: The Digital Output state (on/off) upon rebooting the device may vary depending on the model, eg. MAX

BR1 MK2 = Persistent; MAX Transit Mini with ContentHub = Reset to default, etc.

Analog Input - to be confirmed. In most cases, it should read the external input and determine

the voltage level.

https://www.peplink.com

177