Users Manual

Broadcast SSID

This setting specifies whether or not Wi-Fi clients can scan the SSID of this

wireless network. Broadcast SSID is enabled by default.

Data Rate

Select Auto to allow the Pepwave router to set the data rate automatically,

or select Fixed and choose a rate from the displayed drop-down menu.

Multicast Filter

This setting enables the filtering of multicast network traffic to the wireless

SSID.

Multicast Rate

This setting specifies the transmit rate to be used for sending multicast

network traffic. The selected Protocol and Channel Bonding settings will

affect the rate options and values available here.

IGMP Snooping

To allow the Pepwave router to listen to internet group management protocol

(IGMP) network traffic, select this option.

DHCP Option 82

If you use a distributed DHCP server/relay environment, you can enable this

option to provide additional information on the manner in which clients are

physically connected to the network.

Layer 2 Isolation

Layer 2 refers to the second layer in the ISO Open System Interconnect

model.

When this option is enabled, clients on the same VLAN, SSID, or subnet are

isolated to that VLAN, SSID, or subnet, which can enhance security. Traffic

is passed to the upper communication layer(s). By default, the setting is

disabled.

Maximum Number of

Clients

Indicate the maximum number of clients that should be able to connect to

each frequency.

- Advanced feature. Click the button on the top right-hand corner to activate.

Security Settings

Security Policy

This setting configures the wireless authentication and encryption methods.

Available options :

● Open (No Encryption)

● Enhanced Open (OWE)

● WPA3 -Personal (AES:CCMP)

● WPA2/WPA3 -Personal (AES:CCMP)

● WPA2 -Personal (AES:CCMP)

● WPA2 – Enterprise

https://www.peplink.com

186