Users Manual

● WPA/WPA2 - Personal (TKIP/AES: CCMP)

● WPA/WPA2 – Enterprise

When WPA/WPA2 - Enterprise is configured, RADIUS-based 802.1 x

authentication is enabled. Under this configuration, the Shared Key option should

be disabled. When using this method, select the appropriate version using the V1/V2

controls. The security level of this method is known to be very high.

When WPA/WPA2- Personal is configured, a shared key is used for data encryption

and authentication. When using this configuration, the Shared Key option should be

enabled. Key length must be between eight and 63 characters (inclusive). The

security level of this method is known to be high.

NOTE:

When WPA2/WPA3- Personal is configured, if a managed AP which is NOT WPA3

PSK capable, the AP Controller will not push those WPA3 and WPA2/WPA3 SSID to

that AP.

Access Control

Restricted

Mode

The settings allow the administrator to control access using MAC address filtering.

Available options are None, Deny all except listed, Accept all except listed and

Radius MAC Authentication.

MAC Address

List

Connection coming from the MAC addresses in this list will be either denied or

accepted based on the option selected in the previous field.

If more than one MAC address needs to be entered, you can use a carriage return

to separate them.

https://www.peplink.com

187