Users Manual

1Mbps is selected.

Beacon Interval

This option is for setting the time interval between each beacon. By default,

100ms is selected.

DTIM

This field allows you to set the frequency for the beacon to include a delivery

traffic indication message. The interval is measured in milliseconds. The

default value is set to 1 ms.

Slot Time

This field is for specifying the wait time before the Router transmits a packet.

By default, this field is set to 9 µs.

ACK Timeout

This field is for setting the wait time to receive an acknowledgement packet

before performing a retransmission. By default, this field is set to 48 µs.

Frame

Aggregation

This option allows you to enable frame aggregation to increase transmission

throughput.

Guard Interval

This setting allows choosing a short or long guard period interval for your

transmissions.

- Advanced feature, please click the button on the top right-hand corner to activate.

https://www.peplink.com

195