Users Manual

ManualsBrandsPEPWAVE ManualsElectronicspeplink PEPWAVE Wireless Product

Web Session

Timeout

This field specifies the number of hours and minutes that a web session can

remain idle before the Pepwave router terminates its access to the web admin

interface. By default, it is set to 4 hours.

Authentication

by RADIUS

With this box is checked, the web admin will authenticate using an external

RADIUS server. Authenticated users are treated as either "admin" with full

read-write permission or “user” with read-only access. Local admin and user

accounts will be disabled. When the device is not able to communicate with the

external RADIUS server, local accounts will be enabled again for emergency

access. Additional authentication options will be available once this box is

checked.

Auth Protocol

This specifies the authentication protocol used. Available options are MS-CHAP

v2 and PAP.

Auth Server

This specifies the access address and port of the external RADIUS server.

Auth Server

Secret

This field is for entering the secret key for accessing the RADIUS server.

Auth Timeout

This option specifies the time value for authentication timeout.

Accounting

Server

This specifies the access address and port of the external accounting server.

Accounting

Server Secret

This field is for entering the secret key for accessing the accounting server.

Network

Connection

This option is for specifying the network connection to be used for

authentication. Users can choose from LAN, WAN, and VPN connections.

CLI SSH

The CLI (command line interface) can be accessed via SSH. This field enables

CLI support. For additional information regarding CLI, please refer to Section

30.5.

CLI SSH Access

This menu allows you to choose between granting access to LAN and WAN

clients, or to LAN clients only.

CLI SSH Port

This field determines the port on which clients can access CLI SSH.

CLI SSH Access

Public Key

This field is for entering the Public Key for Admin Users and Read-only Users to

access CLI SSH.

Security

This option is for specifying the protocol(s) through which the web admin

interface can be accessed:

● HTTP

● HTTPS

● HTTP/HTTPS

Web Admin Port

This field is for specifying the port number on which the web admin interface can

https://www.peplink.com

208