Users Manual

32 inclusively (For example, 192.168.0.0/24).

To define multiple subnets, separate each IP subnet one in a line. For example:

● 192.168.0.0/24

● 10.8.0.0/16

Allowed WAN IP

Address(es)

This is to choose which WAN IP address(es) the web server should listen on.

28.2 Firmware

Web admin interface : automatically check for updates

Upgrading firmware can be done in one of three ways.

Using the router’s interface to automatically check for an update, using the router’s interface to

manually upgrade the firmware, or using InControl2 to push an upgrade to a router.

The automatic upgrade can be done from System > Firmware.

If an update is found the buttons will change to allow you to Download and Update the

firmware.

Click on the Download and Upgrade button. A prompt will be displayed advising to download

the Current Active Configuration. Please click on the underlined download text. After

downloading the current config click the Ok button to start the upgrade process.

The router will download and then apply the firmware. The time that this process takes will

depend on your internet connection’s speed.

https://www.peplink.com

210