Users Manual

The firmware will now be applied to the router*. The amount of time it takes for the firmware to

upgrade will also depend on the router that’s being upgraded.

*Upgrading the firmware will cause the router to reboot.

Web admin interface : install updates manually

In some cases, a special build may be provided via a ticket or it may be found in the forum.

Upgrading to the special build can be done using this method, or using IC2 if you are using that

to manage your firmware upgrades. A manual upgrade using the GA firmware posted on the

site may also be recommended or required for a couple of reasons.

All of the Peplink/Pepwave GA firmware can be found here Navigate to the relevant product line

(ie. Balance, Max, FusionHub, SOHO, etc). Some product lines may have a dropdown that lists

all of the products in that product line. Here is a screenshot from the Balance line.

If the device has more than one firmware version the current hardware revision will be required

to know what firmware to download.

Navigate to System > Firmware and click the Choose File button under the Manual Firmware

Upgrade section. Navigate to the location that the firmware was downloaded to select the “.img”

file and click the Open button.

Click on the Manual Upgrade button to start the upgrade process.

https://www.peplink.com

211