Users Manual

except for those on the Exempted User Groups or Exempted Subnets defined below.

If "foobar.com" is entered, any web site with a host name ending in foobar.com will be blocked,

e.g. www.foobar.com, foobar.com, etc. However, "myfoobar.com" will not be blocked.

You may enter the wild card ".*" at the end of a domain name to block any web site with a host

name having the domain name in the middle. If you enter "foobar.*", then "www.foobar.com",

"www.foobar.co.jp", or "foobar.co.uk" will be blocked. Placing the wild card in any other position

is not supported.

The device will inspect and look for blocked domain names on all HTTP and HTTPS traffic.

21.2.4 Customized Domains

Enter an appropriate website address, and the Pepwave MAX will block and disallow

LAN/PPTP/SpeedFusionTM peer clients to access these websites. Exceptions can be added

using the instructions in Sections 20.1.3.2 and 20.1.3.3.

You may enter the wild card ".*" at the end of a domain name to block any web site with a host

name having the domain name in the middle. For example, If you enter "foobar.*," then

"www.foobar.com," "www.foobar.co.jp," or "foobar.co.uk" will be blocked. Placing the wild card in

any other position is not supported.

The Pepwave MAX will inspect and look for blocked domain names on all HTTP traffic. Secure

web (HTTPS) traffic is not supported.

21.2.5 Exempted User Groups

Check and select pre-defined user group(s) who can be exempted from the access blocking

rules. User groups can be defined at QoS>User Groups section. Please refer to Section 17.1

for details.

21.2.6 Exempted Subnets

With the subnet defined in the field, clients on the particular subnet(s) can be exempted from the

access blocking rules.

21.2.7 URL Logging

Click enable, and the enter the ip address and port (if applicable) where your remote syslog

server is located.

https://www.peplink.com

152