Users Manual

SNMPv1

This option allows you to enable SNMP version 1.

SNMPv2

This option allows you to enable SNMP version 2.

SNMPv3

This option allows you to enable SNMP version 3.

SNMP Trap

This option allows you to enable SNMP Trap. If enabled, the following entry fields

will appear.

SNMP Trap

Community

This setting specifies the SNMP Trap community name.

SNMP Trap

Server

Enter the IP address of the SNMP Trap server.

SNMP Trap Port

This option specifies the port which the SNMP Trap server will use. The default

port is 162.

SNMP Trap

Server Heartbeat

This option allows you to enable and configure the heartbeat interval for the SNMP

Trap server.

To add a community for either SNMPv1 or SNMPv2, click the Add SNMP Community button in

the Community Name table, upon which the following screen is displayed:

SNMP Community Settings

Community

Name

This setting specifies the SNMP community name.

https://www.peplink.com

219