Users Manual

Allowed Source

Subnet Address

This setting specifies a subnet from which access to the SNMP server is allowed.

Enter subnet address here (e.g., 192.168.1.0) and select the appropriate subnet

mask.

To define a user name for SNMPv3, click Add SNMP User in the SNMPv3 User Name table,

upon which the following screen is displayed:

SNMPv3 User Settings

User Name

This setting specifies a user name to be used in SNMPv3.

Authentication

Protocol

This setting specifies via a drop-down menu one of the following valid

authentication protocols:

● NONE

● MD5

● SHA

When MD5 or SHA is selected, an entry field will appear for the password.

Privacy Protocol

This setting specifies via a drop-down menu one of the following valid privacy

protocols:

● NONE

● DES

When DES is selected, an entry field will appear for the password.

28.8 SMS Control

SMS Control allows the user to control the device using SMS even if the modem does not have

a data connection. The settings for configuring the SMS Control can be found at System>SMS

Control.

Supported Models

● Balance/MAX: *-LTE-E, *-LTEA-W, *-LTEA-P, *-LTE-MX

● EPX: *-LW*, *-LP*

When this box is checked, the device will be allowed to take actions according to received

commands via SMS.

Make sure your mobile plan supports SMS, and note that some plans may incur additional

charges for this.

SMS Control can reboot devices and configure cellular settings over signalling channels, even if

the modem does not have a data connection.

For details of supported SMS command sets, please refer to our knowledge base.

https://www.peplink.com

220