User's Manual

this WAN connection, and will be used when none of the other higher priority
connections are available.
Standby State
This option allows you to choose whether to remain connected when this
WAN connection is no longer in the highest priority and has entered the
standby state. When Remain connected is chosen, upon bringing up this
WAN connection to active, it will be immediately available for use.
If this WAN connection is charged by connection time, you may want to set
this option to Disconnect so that connection will be made only when needed.
PepVPN may use connected standby WAN for failover if link failure detected
on the higher priority WAN, you can set this option to Disconnect to avoid
data passing through.
Reply to ICMP
PING
If the checkbox is unticked, this option is disabled and the system will not
reply to any ICMP ping echo requests to the WAN IP addresses of this WAN
connection.
Default: ticked (Yes)
Upload Bandwidth
This field refers to the maximum upload speed.
This value is referenced when default weight is chosen for outbound traffic
and traffic prioritization. A correct value can result in effective traffic
prioritization and efficient use of upstream bandwidth.
Download
Bandwidth
This field refers to the maximum download speed.
Default weight control for outbound traffic will be adjusted according to this
value.