User's Manual

MTU
MTU
This field is for specifying the Maximum Transmission Unit value of the WAN
connection. An excessive MTU value can cause file downloads stall shortly after
connected. You may consult your ISP for the connection's MTU value.
9.3 Wi-Fi WAN
To access Wi-Fi WAN settings, click Network>WAN>Details.
WAN Connection Settings
WAN Connection
Name
Enter a name to represent this WAN connection.
Operating
Schedule
Click the drop-down menu to apply a time schedule to this interface.
Independent from
Backup WANs
If this is checked, the connection will be working independent from other Backup
WAN connections. Those in Backup Priority will ignore the status of this WAN
connection, and will be used when none of the other higher priority connections
are available.
Standby State
This setting specifies the state of the WAN connection while in standby. The
available options are Remain Connected (hot standby) and Disconnect (cold
standby).
MTU
This setting specifies the maximum transmission unit. By default, MTU is set to
Custom 1440. You may adjust the MTU value by editing the text field. Click
Default to restore the default MTU value. Select Auto and the appropriate MTU
value will be automatically detected. The auto-detection will run each time the