User's Manual

Beacon Miss
Counter
This sets the threshold for the number of missed beacons.
Bandwidth Allowance Monitor
Action
If enabled, you will be notified by email when usage hits 75% and 95% of the
monthly allowance.
If Disconnect when usage hits 100% of monthly allowance is checked, this
WAN connection will be disconnected automatically when the usage hits the
monthly allowance. It will not resume connection unless this option has been
turned off or the usage has been reset when a new billing cycle starts.
Start Day
This option allows you to define which day of the month each billing cycle begins.
Monthly
Allowance
This field is for defining the maximum bandwidth usage allowed for the WAN
connection each month.
Health Check Settings
Method
This setting specifies the health check method for the WAN connection. This value
can be configured as Disabled, PING, DNS Lookup, or HTTP. The default
method is DNS Lookup. For mobile Internet connections, the value of Method
can be configured as Disabled or SmartCheck.
Health Check Disabled