Users Manual

https://www.peplink.com 111 Copyright @ 2021 Peplink
Connection
Priority
This option allows you to configure the WAN connection whether for normal daily usage or as a
backup connection only.
If Always-on is chosen, the WAN connection will be kept on continuously, regardless of the
priority of other WAN connections.
If Backup is chosen, the WAN connection will depend on other WAN connections. It will not be
used when one or more higher priority dependent WAN connections are connected.
Independent
from Backup
WANs
If this is checked, the connection will be working independent from other Backup WAN
connections. Those in Backup Priority will ignore the status of this WAN connection, and will be
used when none of the other higher priority connections are available.
Idle Disconnect
If this is checked, the connection will disconnect when idle after the configured Time value.
This option is disabled by default.
Reply to ICMP
PING
If the checkbox is unticked, this option is disabled and the system will not reply to any ICMP
ping echo requests to the WAN IP addresses of this WAN connection.
Default: ticked (Yes)