Users Manual

https://www.peplink.com 151 Copyright @ 2021 Peplink
For a full explanation of each Algorithm, please see the following article:
https://forum.peplink.com/t/exactly-how-do-peplinks-load-balancing-algorithmns-work/8059
Load Distribution
Weight
This is to define the outbound traffic weight ratio for each WAN connection.
When No
connections are
available
This field allows you to configure the default action when all the selected Connections are
not available.
Drop the Traffic - Traffic will be discarded.
Use Any Available Connections - Traffic will be routed to any available Connection, even
it is not selected in the list.
Fall-through to Next Rule - Traffic will continue to match next Outbound Policy rule just like
this rule is inactive.
Terminate
Sessions on Link
Recovery
This setting specifies whether to terminate existing IP sessions on a less preferred WAN
connection in the event that a more preferred WAN connection is recovered. This setting is
applicable to the Priority algorithms. By default, this setting is disabled. In this case, existing
IP sessions will not be terminated or affected when any other WAN connection is recovered.
When this setting is enabled, existing IP sessions may be terminated when another WAN
connection is recovered, such that only the preferred healthy WAN connection(s) is used at
any point in time.