Users Manual

https://www.peplink.com 160 Copyright @ 2021 Peplink
13.5.1 Servers
The settings to configure servers on the LAN are located at Network>Inbound Access>Servers.
Inbound connections from the Internet will be forwarded to the specified Inbound IP address(es) based on
the protocol and port number. When more than one server is defined, requests will be distributed to the
servers in the weight ratio specified for each server.
To define a new server, click Add Server, which displays the following screen:
Enter a valid server name and its corresponding LAN IP address. Upon clicking Save after entering required
information, the following screen appears.
To define additional servers, click Add Server and repeat the above steps.
13.5.2 Services 
Services are defined at Network>Inbound Access>Services.